The safe operation of the Industrial Electric Winches

The safe operation of the Industrial Electric Winches

1. Construction units, the Industrial Electric Winches should be installed in a solid foundation, good vision on the foundation above the fuselage and anchor must be strong. Require the hoist and guide pulley centerline should be vertical alignment, hoist distance pulley generally should not be less than fifteen meters.

2. Before the transfer operation, should check the wire rope, clutch, brake, insurance ratchet, drive pulley, etc., to determine safe and reliable, before operation. The wire rope must be arranged neatly on the reel, and at least three turns in the operation. In the operation, are not allowed to cross the hoist wire rope to prevent accidents.

3. In the lifting of heavy objects in the air to stay, in addition to the use of brakes, and the application of ratchet insurance card. Operation, it is strictly forbidden to leave the post.

4. Work to listen to the commander of the signal, the signal is unknown or may cause an accident, should be suspended operation, to be clear before the situation can continue to operate. In the event of a sudden power failure, should immediately pull the knife, and will transport objects down.