The maintenance of electric Hoist Trolley

The maintenance of electric Hoist Trolley

In order to ensure safety and extend the service life of the Hoist Trolley, the safety use conditions of the product should comply with the relevant provisions of the specification; The calcium base lubricating oil in the belt reduction box should be replaced regularly, the maximum period of which shall not exceed half a year. Wire rope should be often keep the lubrication, should not be rust and lose. When the equipment is found to be abnormal, it should be repaired and excluded in time, and it is not allowed to run with the disease. Gear reducer disassembly steps: first the motor large end cover of the three screws off, and then remove the motor. Then the roller is screwed out of the three screws that are covered by the bearing, Then remove the outer cover of the reducer, hold the long shaft with an iron bar, and rush the shaft out. Remove the long axis from the drum, rebalancing will slow down the cabinet to pry open, add a pressure reducer on the cover of the three screws removed, Remove the three screws with a cover on the gearbox, stick against the short shaft head, push out the short shaft, and two teeth shafts can be removed. When installed, the reverse order can be obtained.