Single Girder Electric Overhead Crane With Hoist

Single Girder Electric Overhead Crane With Hoist

Main girder

1.Single girder, made by the high quality I steel and high quality U-shapped slot into

Composition.

2.Material Q235B or Q345B( similar as Fe37 or Fe52).

3.Main girders connected with bolts Arched main beam according to request, the

arch degree F should be (1/1000~1.4/1000)S, max. Arch degree be in the scope of middle span S/10.

End girder
1.Box structure girder welded by U-type groove and steel plate group or only steel

plates, with features of light structure, good rigidity, appearance and welding technology.

2.use LD single girder special wheel, light and strong versatility.

3.Buffers settled at the ends of end girder.

Electric hoist
1.Lifting Mechanism-CD or MD wire rope hoist Crane Traveling Mechanism.
2.Drive separately, composed of traveling motor, traveling reducer, wheel group, etc.

Electrical Equipment
1.Trolley conductor or angle steel conductor power supply

2..Hoist and crane Separately control, move separately or together

3.Flat cable or special cable power supply for electric hoist

4.Galvanize slide and cable trolley, smoothly moving, appearance is aesthetics

5.Electrical non-contact speed regulation control module

6.Operation, hoisting, the point start are very smoothly

7.Power leading has both methods of current collector and flexable cable.

Operation

1.Ground control and cabin control

2.The cabin has open style, close style,can fixed on left or right

3.The open direction include end open,side open or top open

4.The cabin includes special small room for single-girder and capsule cabin

5.Ground control has handle and remote control, do not need to set up special

driver

6.Users can choose as you need

Safety Device

1.Outdoor cranes are equipped with lifting mechanism,

2. electrical control box and rainproof devices

3. Overloading alarm, two grade of top dashing proof protection

4.Crane buffer

5.Anti-collision, sound and light alarm devices

6.Circuit self-check protector

7.Flow phase lack protection

LD Single Girder Electric Overhead Crane With Hoist

The capacity:1-30ton

The span:7.5-31.5m

The working grade:A3-A5

The working temperature:-25C to 40℃(Can be customized)

HD European Single Girder Electric Overhead Crane With Hoist

Model:HD

Capacity:1-20 tons

Speed:Frequency conversion speed

Span:Max 31.5m

Control:pendant control,remote control

Hoist height:1-30m

Power supply:380V 50HZ 3 phase (Can be customized)

Working class:A5 (Can be customized)

LX Single Girder Electric Overhead Crane With Hoist

Model:LX

Capacity:1-2 tons

Hoist height:1-30m

Speed:single speed,double speed

Span:Max 31.5m

Control:pendant control,remote control

Working class:A3

Power supply:380V 50HZ 3 phase(Can be customized)

LB Single Girder Electric Overhead Crane With Hoist

Model:LB

Capacity:1~20tons

Span:Max 31.5 m

Speed:single speed,double speed

Hoist height:1~30m

Control:pendant control,remote control

Working class:A3

Power supply:380V 50HZ 3 phase(Can be customized)