Overhead Track Mounted Cranes Conductive Trolley Line Protective Plate Device Location

Overhead Track Mounted Cranes Conductive Trolley Line Protective Plate Device Location

The conductive sliding contact wire protection plate shall be provided at the following position of the Overhead Track Mounted Cranes：

1. When the driver's cab is located at the end of the trolley, the protective plate shall be provided between the ladder and the tread line and the trolley wire to the crane;

2. Overhead Track Mounted Cranes skirt end of the end beam, should be set to protect the plate to prevent spreader or wire rope and slip line accidental contact;

3. other use of trolley line of the crane, prone to the risk of electric shocks should be set at the location of conductive trolley line protection board;

4. Overhead Track Mounted Cranes for multi-storey layout, the lower cranes touch line set the protective plate. The purpose of setting the conductive trolley wire protection plate is to isolate the trolley wire to prevent the occurrence of electric shock.