Common sense of Industrial Overhead Crane wire rope

Common sense of Industrial Overhead Crane wire rope：The new rope replacement should be the same type of Industrial Overhead Crane wire rope with the original installation, with the same type, if the use of different types, should ensure that the new rope is not lower than the performance of the old rope, and with the reel and pulley groove match;

When replacing the Industrial Overhead Crane wire rope, remove the Industrial Overhead Crane wire rope from the reel or Industrial Overhead Crane wire rope roll to prevent it from ringing, kinking, bending or sticking debris. Truncated Industrial Overhead Crane wire rope should be broken on both sides of the broken wire with a solid wire to prevent the loose strand after cutting off.

When the Industrial Overhead Crane wire rope and the machine part of the friction, should be in the contact parts plus protective measures; bundled rope and hanging objects angular contact, should be in the edges and corners of the wood or copper, etc., to prevent the wire was cut. Lifting the weight, the Industrial Overhead Crane wire rope is not allowed to tilt to prevent the rope failure.

Do not overload the lifting, should be installed overload limiter or torque limiter, and try to avoid the use of sudden shock vibration. A lifting limiter should also be installed to prevent overheating of the Industrial Overhead Crane wire rope.