10t Overhead Crane

10t Overhead Crane Technical Specification: 

  Crane (Hoist) Capacity 10 Ton

     Span (width): 10 M

  Bay Length 18 M

  Hook Height 6 M

  Hoist Speed Double Speed with Approx. Range: (0.8/5m/min )

  Cross Travel speed Double Speed with Approx. Range: (2-20 m/min)

  Long Travel speed Double Speed with Approx. Range :( 2-20 m/min)

  Power supply 440 V(ac) Range 3-phase 50 Hz

  Type of Control Push pendant control

  Hook type & Size  ‘C’ shaped hook 360 degree rotation

  Measuring Meter Measuring meter to count working hours of hoist

  Brakes Inbuilt

  Mechanical buffers  Included on both for traveling and traversing motion

10t Overhead Crane STRUCTURE:

  Main bridge of double girder box construction type suitable for 10M span as per manufacturing

design

  Main bridge to be painted with Matt finish three coasts of Enamel Yellow paint after application of

red oxide primer.

  Construction to suit head room available at the top of the bridge.

  End carriages shall be fabricated from rolled steel section or plates. End carriage shall be of ample

strength to resist all stresses likely to be imposed on them under service conditions including collision

with other cranes or stops.

  The length of the end carriages shall be such that no other part of the crane is damaged in collision.

  End carriage shall be so designed as to distribute the load evenly between the wheels from each

bridge girders

  End carriage to be painted with Matt finish three coasts of Enamel Yellow paint after application of

red oxide primer.

  The wheel base shall not be less than 1/5th of the span. End carriage shall be fitted with safety stop

to prevent the end carriage falling more than 25 mm in the event of breakage of a track wheel,

bogies or axle.

  No cast iron part shall be used on the crane and its accessories.

  Defects in the material like fractures, cracks, blowholes, pitting etc. are not allowed Rectification of

any such flaw is permissible only with the approval of the purchaser.

  All parts of the crane shall be thoroughly cleaned of mill scales, rust or foreign matter and then

painted as per the specification requirements.

Nucleon Crane Group is china famous Single girder Overhead Crane Manufacturer and double girder Overhead Crane Manufacturer.

See more：http://www.nucleoncranegroup.com
http://www.nucleonoverheadcrane.com

Email:info@nucleoncranegroup.com
If you have any questions, Please don't hesitate to contact me.