GB/T 3811-2008

GB6067.1-2010

GB/T14405-2011

GB/T14406-2011

GB/T10183-2005

GB/T5905-2011

JB/T4315-1997

GB/T8918-2006

GB/T700-2006

GB/T1591-2008

Jb928-1994

GB11345-1989

Design rules for cranes 

Crane machinery safety procedures

General overhead crane

General gantry cranes

Tolerance of Overhead crane and gantry crane manufacuturing and rails installation

Crane testing rules and process

Crane Electrical control equipment

Wire rope for cranes

Carbon structural steel 

Low-Alloy High-Tensile Structural Steel 

The standard of Radiographic inspection for weld joint

Manual ultrasonic testing method

DIN EN 14492-2

DIN EN 60204-32

DIN 3051-Sections 1–4

DIN 15017

DIN 15020- Sections 1–2

DIN 15061- Sections 1–2

DIN 15100

DIN 15400 through DIN15414

Cranes – Power Driven Hoists

Safety of Machinery; Electrical Equipment of Machines; Requirements for Hoisting Machines

Lifting Ropes; Steel Wires

Cranes & Hoists; Principles of Motor and Gear Sizing

Hoists; Principles of Rope Reeving

Cranes & Hoists; Grooves for Rope Sheaves & Drums

Serial Lifting Equipment; Nomenclature

Detailed Aspects of Load Hooks and Bottom Block Construction

FEM 1.002

FEM 9.811

FEM 9.511

FEM 9.661

FEM 9.683

FEM 9.852

FEM 9.755

FEM 9.751

FEM 9.901

Illustrated Terminology of Heavy Lifting Equipment
Rope and Chain Hoists – General Specifications
Rules for the Design of Series Lifting Equipment - Classification of Mechanisms
Rules for the design of Series Lifting Equipment - Dimensions and Design of Rope Reeving Components
Selection of Hoist and Travel Motors
Power Driven Series Hoist Mechanisms, Standardized Test Procedure for Verification of the Classification
Measures for Achieving Safe Working Periods for Motorized Serial Hoist Units (S.W.P.)
Power Driven Series Hoist Mechanisms, Safety
Rules for the Design of Series Lifting Equipment and Cranes Equipped with Series Lifting Equipment